If you have a fiberglass canoe, then you can repair various types of damage yourself. There are a few things you need to keep in mind before undertaking this project though. This article will give you a few tips for fiberglass canoe repair.
In order to repair your fiberglass canoe, you will need to use some fiberglass cloth. You should be able to find some at your local marine supply store. The cloth comes in a variety of weights, but it’s best that you use cloth that weighs between six and 7.5 ounces a yard.
Before you attempt fiberglass canoe repair, you will need to sand the damaged area first. This will remove any loose material or gelcoat on the surface. You should use a random orbital sander for this task. A belt sander may be too powerful and remove too much material than you need.
One of the most common types of damage to a canoe is a deep abrasion. This type of repair require you to add fiberglass cloth to the outside of the canoe. If your canoe has a hole all the way through, then you will need to install fiberglass cloth from both the outside and the inside.
When attempting fiberglass canoe repair, it’s best that you have a canoe of denatured alcohol on hand. The alcohol will prove useful for cleaning the surface of the canoe before you repair it. You can also use it to clean up epoxy if you accidentally spill some.
It’s very important that you stay safe while repairing your fiberglass canoe. You should wear a plastic gloves, dust masks, and safety goggles to protect yourself. When mixing epoxy, you should be outside in a well-ventilated area. Also, you may accidentally get resin on your skin while repairing the canoe. It’s a good idea to wear some protective skin cream.
These are a few tips for fiberglass canoe repair. Although fiberglass cloth is available in a wide range of weights, you should only buy cloth that weighs between six and 7.5 ounces. You should also wear gloves, goggles, and a dust mask while repairing the canoe to stay safe.