There are different types of solar panels that you can use to produce power. Each type offers certain advantages and disadvantages. This article will take a look at some of the different types of solar power panels.
One of the first types of solar panels you can use is the single crystal variety. These panels are capable of producing the most power per square foot and are the most efficient. One downside of single crystal solar panels is that they’re very fragile.
Thanks to their fragility, these solar panels need to be installed in a sturdy frame. Although they’re more efficient than multi-crystal designs, they cost about the same.
As you have probably figured out by now, one of the next types of solar panels is the multi-crystal variety. Instead of using a single large cell, they are constructed of an assortment of small cells.
Multi-crystal solar panels require more surface area to generate the same power output as similar single crystal designs. Therefore, they’re slightly less efficient but still cost about the same.
There are also different types of multi-crystal panels. They include cast and string ribbon silicon. String ribbon panels are more expensive but offer more efficiency.
The final type of solar panel is the amorphous type. Also known as thin-film panels, they are constructed of a thin layer of silicon placed into a substrate such as plastic or glass. These panels aren’t the most efficient since they require more space to generate the same amount of power as other technologies.
This is due to the fact that the silicon used to construct them is very impure. The advantage of amorphous panels is that they’re very easy to transport.
These are some of the different types of solar panels. Amorphous designs are some of the least efficient, but they’re much easier to transport. Single crystal solar panels are very fragile, but offer the most efficiency.